|
DT-X11 Series
Hardware Manual
(Version 1.01)
CASIO Computer Co., Ltd.
Copyright ©2006. All rights reserved.
August 2006
5.3.4.
5.3.5.
5.4.
HA-A20BAT/DT-5025LBAT
DT-894CFU CF Card Extension Unit
Reliability
42
42
43
43
43
44
45
45
45
46
46
47
48
48
49
49
51
5.4.1.
5.4.2.
5.4.3.
5.5.
DT-X11
DT-160IOE/DT-169CHGE
DT-5022CHG
Compliance
5.5.1.
5.5.2.
DT-X11
DT-160IOE/DT-169CHGE
Cable Specifications
For Chain Connection and Short Length
For Chain Connection and Long Length
Precautions
Chapter 6.
6.1.
6.2.
Chapter 7.
7.1.
Handling
7.2.
Safety
7.2.1.
7.2.2.
Battery Pack/Memory Backup Battery
General
No part of this document may be produced or transmitted in any form or by any means, electronic or
mechanical, for any purpose, without the express written permission of CASIO Computer Co., Ltd.
in Tokyo Japan. Information in this document is subject to change without advance notice. CASIO
Computer Co., Ltd. makes no representations or warranties with respect to the contents or use of this
manual and specifically disclaims any express or implied warranties of merchantability or fitness for
any particular purpose.
© 2006 CASIO Computer Co., Ltd. All rights reserved.
3
Editorial Record
Manual
Date edited
Page
Content
Version no.
0.90
February 2006
March 2006
August
Tentative version
Original version
1.00
1.01
8
The content in Table 1.2 of Chapter 1.2 is corrected.
The content in Table 2.9 of Chapter 2.7 is corrected.
26
4
Preface
This reference manual describes about the CASIO DT-X11 series handheld terminals with C-MOS
imager or Laser Scanner integrated.
A new generation of handheld terminal has been developed. CASIO introduces the revolutionary
DT-X11 series of handheld terminal with built-in Intel® PXA255 Application Processor, C-MOS
imager or 1D bar code scan engine and diverse wireless LAN communications via Bluetooth,
IEEE802.11b WLAN and WAN card.
Running under Microsoft® Windows® CE 5.0 operating system, the rugged DT-X11 is designed
specifically with the transportation/delivery and logistics in mind.
In this reference manual, the DT-X11 series is described as “DT-X11” or “the terminal” or
“handheld terminal”.
5
1. Overview of the Products
1.1 Features
Incorporates .NET technology
•
•
•
Uses WindowsCE 5.0 operating system.
Makes effective use of .NET resources developed by other corporations.
Employment of eMbedded OS makes it possible to build a flexible WindowsCE system.
Enhanced communicating functions
•
•
•
Covers GPRS/WLAN, etc. by using various communication cards.
Built with Bluetooth® Ver1.2 module.
The transfer rate of the WLAN is 5 Mbps, which is the maximum rate of communication for
peer-to-peer connection with PC via IEEE802.11b.
•
•
The following protocol stacks are available for Bluetooth® interface: GAP (Generic Access),
SDP (Service Discovery), SPS (Serial Port), Dialup Network, File Transfer.
Security function (PEAP EAP-MS-CHAP V2, EAP-TLS, MD5+WEP128)
Superb scanning capability (DT-X11M10E/DT-X11M10RC)
•
With the installed bar code scan engine it is possible to read industrial standard bar code
symbologies.
•
•
Scanning performance is comparable to the CASIO IT-500 series handheld terminal.
Multi-step bar code read function.
Superb scanning capability (DT-X11M30E/DT-X11M30U/DT-X11M30RC)
•
With the installed C-MOS imager it is possible to read 2D symbologies/1D symbologies/OCR
fonts and to capture images.
•
•
Image capturing function (2 to 256 monochromatic tones).
Scanning performance on 1D bar code symbology is comparable to the CASIO DT-800 series
handheld terminal.
•
Multi-step bar code read function.
Support of outstanding development environment
Ample Microsoft development tools provided for easy application development and an advanced
debug environment.
•
•
•
Visual Studio 2005
Visual Studio.NET 2003 (WindowsCE .NET Utilities v 1.1 for Visual Studio .NET 2003)
eMbedded Visual C++ 4.0
High expandability
The standard PCMCIA slot makes it possible to use various standard peripheral cards.
6
Aiming to a full compliance with the “Restriction of the use of certain Hazardous
Substances in electronic equipment (RoHS)” set mandatory on July 1 2006
The following products have been assembled with devices, components and parts manufactured
using Lead (Pb) free solder.
-
-
-
-
-
DT-X11M10E
DT-X11M10RC
DT-X11M30E
DT-X11M30U
DT-X11M30RC
7
1.2 Available Models
Table 1.1 List of models
Wireless Communication PC Card
Memory
RAM
Model
Scan Engine
slot
Yes
No
Bluetooth IEE802.11b
FROM
128MB
128MB
128MB
128MB
128MB
DT-X11M10E
DT-X11M10RC
DT-X11M30E
DT-X11M30U
DT-X11M30RC
Laser Scanner
Laser Scanner
C-MOS Imager
C-MOS Imager
C-MOS Imager
Yes
Yes
Yes
Yes
Yes
Yes
No
64MB
64MB
64MB
64MB
64MB
Yes
Yes
No
Yes
Yes
No
Table 1.2 Options
Model
Product
Bridge Satellite Cradle
Remark
DT-160IOE
DT-169CHGE
DT-891WH
Cradle-type battery charger
Wall-mount Unit
DT-167CHGE
DT-827CAC
DT-5022CHG
Car Mounted Battery Charger
Car Power Cable
Not marketable in the USA/Canada
Dual battery charger
AD-S45150AU AC adaptor
AC input 100 to 230VAC. With US power cord. For
DT-5022CHG
AD-S45150AE
AC input 100 to 230VAC. With European power
cord. For DT-5022CHG
AD-S42120AE
AC input 100 to 230VAC. For
DT-160IOE/DT-169CHGE
Lithium-ion rechargeable battery 1,700 mAh
Lithium-ion rechargeable battery 3,400 mAh
CF Type I/ Type II. The large-size card cover
comes as standard
HA-A20BAT
Batterypack (Standard)
DT-5025LBAT Large-capacity battery pack
DT-894CFU
CF Card Extension Unit
Communication Card Cover
RS-232C Cable
DT-892TCV
DT-893LTCV
DT-882RSC
DT-883RSC
DT-887AXA
DT-888RSC
DT-380USB
For standard-size card
For large-size card
25-pin male
25-pin female
Length; 1.5 m, 9-pin female
Length; 1.0 m
RS-422 Cable
USB Cable
Length; 2.0 m
Table 1.3 Accessories
Name
Q’ty
1
Remark
In English and Chinese (in simplified Chinese
characters)
User’s guide
Stylus
1
1
1
2
Large-capacity battery pack cover
Wrist strap
Required when DT-5025LBAT is installed.
PC Card Remover
8
1.2.1 Options and Interfaces
DT-X11
USB Port
(Ver1.1 Function)
PC
IrDA Printe,retc.
USB
RS-232C
IrDA Port
(IrDA1.1)
Bridge Satellite Cradle
DT-160IOE
RS-422
RS-422
PC
AC Adaptor
AD-S42120A-E
Bridge Satellite Cradle
DT-160IOE
Power Supply
Terminals
(Built-in Charge
Circuit)
Cradle-type Battery
Charger
DT-169CHGE
AC Adaptor
AD-S42120A-E
AC Adaptor
AD-S42120A-E
Car Mounted Battery
Charger
DT-167CHGE
Car Power Cable
DT-827CAC
Battery Pack
HA-A20BAT
Battery Pack
HA-A20BAT
Large-capacity
Battery Pack
Large-capacity
Battery Pack
DT-5025LBAT
DT-5025LBAT
Dual Battery
Charger
DT-5022CHG
Dual Battery
Charger
DT-5022CHG
AC Adaptor
AD-S45150AU
AD-S45150AE
without
WLAN
models.
PCMCIA
Memory Car,d
Communication Card Cover
DT-892TCV
WLAN Card,
etc.
DT-893LTCV
IEEE802.11b,g
WLAN Module
WLAN
integrated
Models.
CF Card Extension
Unit
DT-894CFU
Memory Car,d
WLAN Card, etc.
CF Card ExtensionI/F
Bluetooth Module
(Ver1.2Class2)
Pocket Printe,r
etc.
Fig. 1.1
9
1.3 General Guide
1.3.1 DT-X11
Left
Front
Right
Back
1 2
15
22
3
4
23
24
16
17
19
18
20
5
7
6
8
14
25
18
13
9
10
11
12
21
Fig. 1.2
Table 1.4 Names of parts
No.
1
Name
Description
Indicates the result of a bar code reading or other read operation.
Red : Read error
Indicator 1
Indicator 2
Green : Read successful
2
3
This lamp indicates the charge status of the battery pack.
Red
: Charging
Green : Charging complete
LCD Panel/Touch Screen
Shows text, operation indicators, etc. Also, operations can be performed
and text can be input using the supplied stylus.
4
5
6
Buzzer
Sounds a buzzer.
Power Key
Cursor Keys
Hold down for about one second to turn the power on or off.
These keys operate much like a computer’s cursor keys. They can be
used to select items, scroll screen contents, etc.
7
8
9
Programmable Key
Numeric Keys
Execute Key
This key can be assigned with any function available.
Use these keys to input numbers and letters.
Press to register an input value and advance to the next step.
Continue.
10
10 Function Keys
These keys can be assigned any function other than barcode reading.
The following are the initial default settings.
F1
F2
F3
F4
: Deletes one character to the left.
: Inputs a hyphen (-).
: Inputs a period (.).
: Toggles to switch between numbers and alphabets.
11 IR Port
This port is used for IR communication with another Handheld
Terminal or Bridge Satellite Cradle.
12 Power Contacts
Contact point for supplying power from Bridge Satellite Cradle and
Cradle-type Battery Charger.
13 CLR Key
14 Fn Key
Press to clear all key inputs.
Press this key and then a function key or number key to configure
settings or to run previously registered applications.
For insertion of a separately available PC card.
15 PC Card Slot
16 USB Port
For connection to a computer or other device using a USB cable.
For connection of a commercially available headset (2.5mm).
Slide these switches to lock and release the battery pack cover.
17 Headset Jack
18 Battery Pack Cover Lock
Switches
19 R Trigger Key
Press to perform a code read operation. This is also pressed to perform a
full reset.
20 L Trigger Key
Press to perform a code read operation. This is also pressed to cancel a
full reset.
21 Wrist Strap Hole
22 C-MOS Imager (C-MOS
Imager models only)
Reader Port (Laser Scanner
models only)
Connect the wrist strap here.
Reads 1D bar codes and 2D codes.
Reads 1D bar codes.
23 Reset Switch
Press to reset the Handheld Terminal.
24 CF Card Slot Unit Terminal For connection of a separately available CF Card Extension Unit.
25 Battery Pack Cover Covers the compartment that holds the battery pack.
11
|